Schedule Appointment

 

Just about every person maintains their unique idea in relation to What Would Cause My Electric Water Heater to Stop Working?.

Numerous contemporary homes utilize an electric hot water heater for their heater, as a result of its ease as well as convenience of use. However, similar to any other electric appliances, issues may arise with its usage, all of a sudden. It can be truly irritating to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient and even too warm. Whatever the case may be, water heater troubles can be rather stressful. Thankfully, we've made a listing of possible options to your hot water heater issues. There are a variety of aspects that can trigger most of these troubles, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the main power supply for safety and security. Whatever the issue is, getting it repaired should not posture excessive of an issue if you adhere to these steps:

 

Call An Expert:

If after replacing all malfunctioning parts and also resetting your temperature, the hot water heater still isn't working, you may require to speak to a professional plumber for a specialist point of view. The trouble with your heating unit could be that the hot and cold faucets have actually been changed or it might be undersized for the amount of hot water needed in your house. Whatever the situation may be, a professional plumber would certainly aid resolve the problem.

 

Examine Your Power Supply:

As fundamental as this might appear, it is extremely essential. Without sufficient power, your hot water heater will not function. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, just turn it on and off again. Change any type of busted or worn-out fuse. Test the device with power after these adjustments to see if it's now functioning.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't warm sufficient, you may need to check the temperature level setups on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the gain access to panel and press the red button for temperature level reset over the thermostat. This need to help heat the water. Turn the circuit breaker back on as well as inspect if the trouble has actually been dealt with.

 

Inspect the Heating Element in the Water Heater:

If it's not a power issue, then try taking a look at your burner if it is still functioning. Examine each of your burner to ensure the trouble isn't with any one of them. If any one of them is faulty, replace that part and after that check whether the hot water is back on.

 

Conclusion

Water heater issues are not always major. A number of them result from minor issues like a blown fuse or worn-out burner. Changing the damaged components must work. Nevertheless, if you are still not able to fix the issue, give a call to your nearby plumber to find to get it repaired.

 

What Would Cause My Electric Water Heater to Stop Working?

 

Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.

To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.

 

Basic Water Heater Troubleshooting

 

Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.

If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.

If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.

When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.

 

Conduct Advanced DIY Water Heater Troubleshooting

 

If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.

Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:

 

The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.

If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.

The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.

While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.

Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.

While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working

 

I'm very eager about No Hot Water — Water Heater Repair and I'm hoping you appreciated the entire article. Sharing is good. You just don't know, you could be helping someone out. Thanks so much for going through it.

Maintenance Sign-Up